-40%
Vertex, Semi Universal Dividing Head w/ Plates & Tailstock, BS-0-BH, 1001-050
Vertex, Semi Universal Dividing Head w/ Plates & Tailstock, BS-0-BH, 1001-050
Vertex, Semi Universal Dividing Head w/ Plates & Tailstock, BS-0-BH, 1001-050

Vertex, Semi Universal Dividing Head w/ Plates & Tailstock, BS-0-BH, 1001-050

$ 211.2

Availability: 100 in stock
  • Bundle Description: Plates, Tailstock and accessories
  • Head stock Dimension(AxBxH): 177mm(6 31/32”)x188mm(7 13/32”)x173mm(6 13/16”)
  • Brand: VERTEX
  • All returns accepted: Returns Accepted
  • Taper of Center: MT-2, Spindle Through Hole
  • MPN: 1001-050
  • Semi universal Dividing Head Include: Dividing Plates DP-1 and Tail-stock TS-1
  • Setting Position: Horizontal/Vertical
  • Country/Region of Manufacture: Taiwan
  • Condition: New
  • Model: BS-0-BH
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Custom Bundle: Yes
  • Tilting: No
  • Restocking Fee: No
  • NOTE: New version DOES NOT include Threaded Spindle Nose
  • Applicable Chuck: 5”
  • Operation: Manual
  • Tail Stock Dimension (A1xB1xH1): 155-180mm(6 7/64”-7 3/32”)x64(2 33/64”)x107mm(4 7/
  • Return shipping will be paid by: Buyer

    Description

    Semi universal type, comes complete with dividing plates DP-1 and tailstock TS-1. Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the worm and the worm gear is 40:1. All internals and worm are hardened and grounded, spindle is rigidly held in a taper roller bearing, the swivel head can be locked in any position, from 10 degrees below the horizontal to 90 degrees above, (vertical position), the movement is smooth and precise. All models have 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24. Easy indexing of all numbers from 2 to 50 and many others from 52 to 380. The head is accurate and precise. It has almost non backslash, excellent appearance and a strong structure: All combined to offer a smooth operation. Hardened and ground spindle is rigidly held in a taper roller bearing.
    Specifications
    Dividing Head, Applicable Chuck
    : 5 inches
    Headstock, A
    : 6.97 inches
    Headstock, b
    : 3.583 inches
    Headstock, g
    : 0.63 inches
    Headstock, H
    : 6.81 inches
    Headstock, I
    : 0.512 inches
    Headstock, Spindle Through Hole
    : 0.709 inches
    Headstock, Taper of Center
    : MT-2
    Tailstock, A1
    : 6.10 - 7.09 inches
    Tailstock, b1
    : 3.701 inches
    Tailstock, g1
    : 0.63 inches
    Tailstock, h1
    : 4.252 inches
    Tailstock, I1
    : 0.433 inches