-40%

IAG STAGE 2 FA20 DIT SUBARU SHORT BLOCK ENGINE FOR 2015-19 WRX

$ 2111.99

Availability: 100 in stock
  • Condition: New
  • Number of Cylinders: 4
  • Type: Short Block
  • Manufacturer Part Number: IAG-ENG-1206
  • Engine Size: 2.0
  • Brand: IAG Performance
  • Returns Accepted: ReturnsNotAccepted

    Description

    SHIPPING DISCLAIMER FOR STATES ( CALIFORNIA, FLORIDA,TENNESSEE, LOUISIANA, MASSACHUSETTES, MARYLAND AND HAWAII)
    DUE TO NEW LAWS STARTING APR 1 2021, WE ARE UNABLE TO DROP SHIP AFTERMARKET (NON OEM) PARTS FROM OUR VENDORS DIRECTLY TO YOUR RESIDENTS. WHAT THIS MEANS IS YOU WILL NEED TO PAY AN EXTRA SHIPPING CHARGE TO HAVE THE PART SHIPPED DIRECTLY TO OUR WAREHOUSE AND THEN SHIPPED TO YOUR RESIDENTS. WE WILL CONTACT ANYONE IN THESE AREAS AFTER PURCHASE TO GIVE A TOTAL SHIPPING ESTIMATE.
    THANK YOU!
    IAG Stage 2 FA20 DIT Short Block
    The IAG Stage 2 short block starts with new Subaru FA 2.0L engine case halves that are bored and honed to 86.1mm on our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG‘s in-house honing process is able to set piston to wall clearances tighter for a quieter running engine. The short block is measured and assembled using a new 2015-19 Subaru 2.0L WRX crankshaft that is matched to King main bearings. Brian Crower H-Beam rods with ARP2000 rod bolts are utilized along with King or ACL rod bearings. The case halves are sealed with new OEM case bolts and sealant. Finally, IAG-Spec 86.1mm forged pistons are spec'd and installed along with an OEM oil plug finishing off the short block.
    Stage 2 FA20 Includes:
    Case Halves -
    Brand new OEM Subaru FA20 case halves, bored and honed to 86.1mm
    Pistons -
    IAG-Spec 86.1mm Forged Pistons, Ring Set, and .150" x 2.250" Chromoly Wrist Pins.
    Connecting Rods -
    Brian Crower H-Beam / ARP2000 Rod Bolts
    Rod -
    ACL or King XPG
    Main Bearings -
    King XPG
    Crankshaft -
    New Subaru FA20 DIT WRX crankshaft
    Case / Main Bolts -
    Standard Subaru case bolts
    Hardware
    - OEM Oil Plug - comes preinstalled at the oil pan location
    Compression Ratio:
    10.0:1 (.6 lower than stock compression) on standard gasket thickness.
    Power:
    The IAG Stage 2 Short Block has a power output rating of 600BHP
    *All IAG Short Blocks are balanced and blueprinted.
    These blocks are built to order and have a lead time of 2-3 weeks.  Free shipping includes the 48 continental states only and will be shipped in
    a reinforced triple wall cardboard box.
    We are an authorized IAG dealer and an OEM Subaru parts dealership.