-40%
3C collet draw tube, adapter and Hardinge collets for Logan or South Bend lathe
3C collet draw tube, adapter and Hardinge collets for Logan or South Bend lathe
3C collet draw tube, adapter and Hardinge collets for Logan or South Bend lathe
3C collet draw tube, adapter and Hardinge collets for Logan or South Bend lathe
3C collet draw tube, adapter and Hardinge collets for Logan or South Bend lathe

3C collet draw tube, adapter and Hardinge collets for Logan or South Bend lathe

$ 92.4

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Condition: Used
  • Brand: Hardinge

    Description

    Here is a complete vintage 3C collet draw-tube set-up, with Hardinge collets.  Very nice burly-wood hand wheel.  The tube is approximately 11.25" long.  This came off a Logan 10" lathe, but should fit a South Bend or equivalent lathe.  The spindle adapter is MT 3.  This is in excellent condition, with no galling or wear.
    Also included are 11 Hardinge 3C collets in the following sizes, round and hex:
    1/16"
    1/8"
    1/4"
    5/16"
    3/8"
    7/16"
    1/2" (slight damage to face)
    5/16" Hex
    3/8" Hex
    7/16" Hex
    Please ask any questions.